Vario Setup

Intuitive commissioning App for the modular lighting control device "instalight Vario". Program a complete lighting application within only three steps and afford your customer a comfortable operation via the App "Vario" as well as via optional connected push-buttons: 1. Choose a colour mode: RGB, RGBW, Tunable White, Unicolor (or combinations) 2. Choose an operation profile for the assignment of push-buttons 3. Choose your customers favourites from a set of professionally pre-programmed light sequences, and provide them with the pre-defined touch operating areas. Main features: - Control of luminaires via protocol USITT DMX512-A (512 channels RGB, RGBW or TW with 40 frames/s) - Dimming of luminaires with DALI (up to 2x64 devices via 2x DALI dt6 broadcast) - Control of Tunable White with DALI (up to 2x64 devices via 2x DALI dt8 Tunable White or up to 2x32 devices via 2x DALI dt6 addressed) - Control of luminaires via protocol LEDTRIX (LED linear and plane systems with 2x60 channels RGB, RGBW or TW) - Control of LED applications via universal PWM interface (4 PWM channels with up to 90 W each) - Integration of up to eight push-buttons via optional binary module inside of the control device - Communication with the control device via WiFi or LAN - Combination of DMX or LEDTRIX with DALI or PWM offers control of ambient- and general lighting - Locking the App using password access Additional note: - Requires control device „instalight Vario“ (see www.insta.de/vario) - Operation of the control device via separate App "Vario" (free)